Page>>1 2 3 4 5 6 7 8 9 10 11
Why Your Company Needs To Hack Itself more Remotely start your car using an Arduino
Credit: Blobug
This
DIYer had a 1st generation iPhone lying around, so he decided to put
it to good use. You can use any phone to accomplish this, even a $10
prepaid phone. An SMS to the iPhone goes through an Arduino which tells
yours car to start or stop from anywhere. There’s some custom
circuitry and programming which is all included in the instructions.
When a text message is sent to the iPhone, the iPhone tells the Arduino
to start the engine, and the iPhone sends a message back reporting that
the start has commenced.
Requirements:
An old jailbroken iPhone, an Arduino, iphone breakout board (I used a PodBreakout Mini) 4x 10k resistors, 1x TIP120, a 5 volt switching supply cell charger (easier than building one), some wiring ability and a general understanding of unix/perl/arduino.
The code:
You can get the code to make it all work here. (SMSresponder.pl, com.SMSresponder.startup.plist and
SMSresponder is a perl script that runs in a loop. Every 30 seconds it checks for a new message since the last time it ran. place it in /var/root/bin/ (you’ll need to create that directory) as this is where the startup system looks for it. You can put it somewhere else, just edit the plist to match.
Requirements:
An old jailbroken iPhone, an Arduino, iphone breakout board (I used a PodBreakout Mini) 4x 10k resistors, 1x TIP120, a 5 volt switching supply cell charger (easier than building one), some wiring ability and a general understanding of unix/perl/arduino.
The code:
You can get the code to make it all work here. (SMSresponder.pl, com.SMSresponder.startup.plist and
SMSresponder is a perl script that runs in a loop. Every 30 seconds it checks for a new message since the last time it ran. place it in /var/root/bin/ (you’ll need to create that directory) as this is where the startup system looks for it. You can put it somewhere else, just edit the plist to match.
iPhone 5 release details "leaked"
Credit: Tech Radar
An
employee for Foxconn in China has reportedly stated production of a
device dubbed the iPhone 5 is about to go into production.
The source also revealed to 9to5Mac there are several sample handsets doing the rounds, but all differ slightly from each other. It is not clear which, if any, is the final device.
Some similarities between all the samples have been noted, including a screen which is 4-inches (or larger) in size, a different form-factor – hinting that Apple is going to move away from the 4/4S design and the devices are longer and wider than previous iPhones.
The source also revealed to 9to5Mac there are several sample handsets doing the rounds, but all differ slightly from each other. It is not clear which, if any, is the final device.
Some similarities between all the samples have been noted, including a screen which is 4-inches (or larger) in size, a different form-factor – hinting that Apple is going to move away from the 4/4S design and the devices are longer and wider than previous iPhones.
iOS 5.0.1 up and running
Good News for all iOS 5.0.1 has been jailbroken successfully and that too untethered.....
In this guide i will show you exactly how to do this.
Lets initiate the process.....
REQUIREMENTS
In this guide i will show you exactly how to do this.
Lets initiate the process.....
REQUIREMENTS
- iOS 5.0.1 ipsw file (google it and you'll find many there).
- Redsnow 0.9.10 b3 (b3 is very important b1 and b2 conatain lots of bugs again google will help).
- Requires iTunes 10.5 or later.
- iDevice (iPhone above 3G would be required because of speed 3G will hang a lot)
- First of all put your iDevice in DFU mode. You can do it in redsnow itself.
- Start rednsow -> Click Extras -> Pwned DFU mode -> Follow the instructions on the screen
- For users who want to know about PWNED DFU mode- it is a deep DFU mode where the device accepts the iPhone for update without checking for many things like custom firmware. For more information just mail me at charanjit@borntohack.in
- After getting into DFU mode screen must be black without anything on it. Then Start iTunes and hit shift+restore (for Windows users) or alt+restore (for Mac Users) and then browse to the ipsw file that you download of iOS 5.0.1
- After all the things done your iPhone must come to life with the iPhone setup on the screen. You can do it but i recommend to jailbreak it first.
- To jailbreak the device open redsnow 0.9.10 b3 again.
- goto extras->select ipsw -> browse to the download iOS 5.0.1 ipsw-> hit back.
- Now you should be on the screen where you selected Extras but this time select jailbreak.
- Follow the instructions on the screen when you hit next on redsnow
- Now you have a jailbroken device in your hand....... You can try
Appsync 5.0+ if you want to install cracked apps just add the repository
http://cydia.hackulo.us....
While running cydia keep one thing in mind donot let the the screen get locked as update stops. For more information read step 6.
(iPod, iPad and iPhone(who have official carrier) people stop here )
- Now for those who want to unlock their iPhone for unofficial
carriers just go to cydia and wait for the updating to finish ( you can
see cydia updating on the top when the black bar is there and update is
running. Here donot let the the screen get locked as update stops). Now
install ultrasnow 1.2.5. it only supports a few basebands read my
previous posts.
Now you are done with the device go on have fun!!!!!!
If any problem occurs the mail me at charanjit@borntohack.in OR just comment here......Page>>1 2 3 4 5 6 7 8 9 10 11
